Power System microtherm 6024gpi   Deutsch    Overview (here: Details) This system can be installed where ever a very comfortable power supply is desired. The current will come mostly from sources as photovoltaics, small wind or hydro turbines and then stored in the system battery. The battery will be protected by means of a charge controller. The system 6024gpi supplies 230V AC and cares for an appropriate battery capacity even then, when the main sources are not sufficient. Main features of the system are: Complete unit comprising sine wave inverter, battery charger and gas powered genset 24V-System, continuous output power 6 kW, battery charger 2kW Connections between inverter, start system and genset prewired. As a setup, just connect the batteries and gas bottle or tank Genset with Vanguard motor, induction generator 3000 VA, propane/butane as a fuel Gas duct with magnetic valve, non adjustable vaporizer, and special carbureter (this avoids common problems with propane kits) Engine start by means of the generator with up to 40 Hz, thus very reliably starting, mainly when it is cold Threephase output for pump systems or other three phase motors up to 2.2 kW. Many parameters adjustable, as start/stop-parameters, controllable outputs, etc. Extensive monitoring possible, historic data included (data logging) Simple remote control via telephone (for instance by the producer or installer in case of problems) The following links will lead you to all available informations on the system mt 6024gpi: Summary with some pictures of the different system components Some examples of what you can see on the control unit and what you can do with it: Set up Logging As the photo below focuses on pure aluminum, the spark plug has been unplugged. Be sure that you will obtain from us a complete and fully functional system.

top home

© microtherm Energietechnik GmbH   contact us